​​​Permanent Pothole Repair Solutions

The Spray Patching Process - ​The spray patcher removes the pothole in one quick and cost effective 4 step process

1. Clean the area with compressed air.

2. Apply an emulsion tack coat.

3. Fill the hole with coated aggregate.

4. Cover with dry aggregate so traffic can resume immediately.

DuraMaxx P5 One-Man Patcher​​​

​​​​​Texas Patcher

Ergonomic No-Stress Boom

​The 3 piece boom design provides the ultimate in support for the operator moving the delivery hose. The boom / slide system easily moves throughout the entire 18 foot work zone.

Heated Emulsion Tank

​The emulsion tank provides enough product to apply over 10 tons of patch before refilling. The heating blankets allow the patcher to be plugged in to keep emulsion at a "ready to go" temperature.

(512) 557 - 3009

​​Vent-Flo Nozzle

​The specially designed Vent-Flo nozzle properly coats the aggregate with the right amount of emulsion regardless of aggregate size. The mix is applied at an angle to the repair allowing maximum placement and best operator safety. The vent holes diffuse / slowdown the air stream to minimize rock overspray and maximize placement into the repair.

In-Cab Operation

​Keep your operators in the turck for maximum safety, comfort and productivity with the DuraMaxx. Convenient joystick controls allow the operator to drive to the pothole, activate the spray injection system and maneuver the nozzle accurately over the repair area. When traveling, the boom folds flat against the front bumper.

* In-Cab Operation

* 5 yd. Aggregate Hopper

* Truck Mounted Convenience 

* Vent-Flo Nozzle​